| Parameters | Specifications | ||
| Pipe Threads | Rc 1/4, 3/8, 1/2 Taper(F) | - Standard | |
| BSP / NPT | - Optional | ||
| Body Material | Al. Alloy die-cast | ||
| Filter Element Size | 5, 25, 40 micron. | ||
| Filter Element Material | Plastic |
- Standard | |
| Sintered Bronze | - Optional | ||
| Filter Bowl Material | Al. Alloy Metal | - Standard | |
| Maximum Inlet Pressure | with Metal Bowl Manual Drain | : 250 psig (17.5 bar) | |
| with Metal Bowl Automatic Drain | : 150 psig (10.5 bar) | ||
| Maximum Operating Temperature (ambient) |
80 C | ||
| Standard nominal flow rate at 10bar (150 psi). Inlet Pressure 6 bar(87 psi) set press. and a drop of 1bar(14.5 psi) from set | 55 scfm (26 dm3/sec) CV (1.04) | ||
| Drain | Manual | - Standard | |
| Regulator Type | Relieving | - Standard | |
| Non - Relieving | - Optional | ||
| Pressure Adjustment | Hand wheel |
- Standard | |
| Regulated secondary outlet pressure (spring range) and recommended Pressure gauge ranges available in kg/cm2) |
Spring Range psi (bar) | Gauge Range psi (bar) | |
| 1 | 1-10 psi (0.07 to 0.70) | 0-15 psi (0-1) | |
| 2 | 3-30 psi (0.21 to 2.10) | 0-30 psi (0-2.5) | |
| 3 | 5-50 psi (0.35 to 3.50) | 0-60 psi (0-4.0) | |
| 4 | 7.5-75 psi (0.50 to 5.00) | 0-100 psi (0-7.0) | |
| 5 | 10-100 psi (0.70 to 7.00) | 0-150 psi (0-10.0) | |
| Gauge size | 50 mm (Dial Size) | ||
| Gauge Port size | Rc 1/4 | ||
| Gauge connection | Back | ||
| Mounting Bracket | Optional | ||
| Panel mounting | Possible - Optional | ||
| Pressure Gauge (scale) | Kg/cm2 (PSI) | - Standard (For Domestic Market) | |
| Bar (PSI) | - Standard (Export)Key Specifications & Features:
|






Price:
Price 30600.0 INR / Number
Minimum Order Quantity : 1 Number
Display Type : local LCD display
Port Size : Typically 14 NPT female or ANSI/DIN flanges (model dependant)
Usage : industrial use
Price 1790.0 INR / Number
Minimum Order Quantity : 10
Display Type : no
Port Size : 9.5 mm
Usage : Mean Well switchmode power supplies (SMPS) are used in a wide range of electronic equipment, including factory control, IT, communications, medical devices, and LED lighting. Usage involves adhering to strict installation, wiring, and environmental guidelines to ensure safety and longevity.
Price 6800.0 INR / Number
Minimum Order Quantity : 10
Display Type : The KSB MIL 78000 control valve series does not have a "display" on the valve body itself; however, it interfaces with external control and feedback devices that provide visual monitoring. The "display type" depends on the positioner or transmitter mounted to the actuator.
Port Size : The port size of the KSB MIL 78000 control valve series is defined by its nominal pipe size, ranging from NPS 1/2 to NPS 6 (approx. 15 mm to 150 mm). Because this is a multistage control valve, the internal "port" refers to the area within the multistep axialflow trim designed to manage high pressure drops
Usage : Power Plant Usage In the energy sector, the MIL 78000 series is standard for several highpressure steam and water control tasks:Boiler Feed Pump Protection: Used for minimum recirculation and spray control to protect pumps during lowload conditions. Drum Level Control: Employed for startup (low load) drum level control in boilers, where valves face high pressure drops and cavitating conditions. Attemperator Control: Acts as a reheater or superheater spray block valve to manage hightemperature water injection. Deaerator Pegging: Manages the steam supplied to deaerators to maintain positive pressure and remove noncondensable gases
Price 55000.0 INR / Number
Minimum Order Quantity : 1 Number
Display Type : No display
Port Size : 1/2 "
Usage : Pressure Calibration